Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to reset the oil change light on a Yamaha XMAX 400 scooter, a very simple and quick operation, to be performed only after completing all scheduled maintenance tasks. Start by inserting the key and turning on the instrument panel, then locate the button marked "Oil Change" under the speedometer. At this point, hold it down for about 15 seconds and release it once the corresponding light goes out. To verify that the operation was successful, you can restart the panel and start the engine.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Yamaha Xmax 400?
How to Reset the Oil Change Light on a Yamaha Xmax 400?
Xmax 400 To reset the Oil Change light on a Yamaha Xmax 400, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, pull…
How to reset the belt change on the Yamaha Xmax 400
How to reset the belt change on the Yamaha Xmax 400
Xmax 400 Following these brief and simple steps, we will see how to reset the belt change indicator light on the Yamaha Xmax 400 scooter. First, we put the sc…
How to reset the belt change on the Yamaha Xmax 400
How to reset the belt change on the Yamaha Xmax 400
Xmax 400 Today we will discover the instructions that will allow us to reset the transmission belt of the Yamaha Xmax 400 scooter. First of all, we put the sc…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos