Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil on a Yamaha Xmax 400 Scooter

Model: Yamaha Xmax 400
Part: Engine oil

Video tutorial

How to change the oil on a Yamaha Xmax 400 scooter? Learn how to replace it. Position the scooter on the original stand, and with a socket wrench, unscrew the drain bolt of the oil sump located on the right side (drain the fluid into a container). Refit the drain bolt to the oil sump.

Unscrew the special bolt just above the drain bolt (as shown in the video). Unscrew the bolts of the oil filter container; remove it from its housing.

Refill the new oil into the engine using a plastic funnel (fill the oil sump with the correct amount); close the oil sump with the locking bolt. Test the scooter's operation.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Yamaha XMAX 400 Scooter?
How to Reset the Oil Change Light on a Yamaha XMAX 400 Scooter?
Xmax 400 In this tutorial, you will see how to reset the oil change light on a Yamaha XMAX 400 scooter, a very simple and quick operation, to be performed onl…
Resetting the service light indicator on the Yamaha Xmax 400.
Resetting the service light indicator on the Yamaha Xmax 400.
Xmax 400 Following these short and simple steps, we will see how to reset the maintenance service light for the regular oil change of the Yamaha Xmax 400 scoo…
How to reset the belt change on the Yamaha Xmax 400
How to reset the belt change on the Yamaha Xmax 400
Xmax 400 Today we will discover the instructions that will allow us to reset the transmission belt of the Yamaha Xmax 400 scooter. First of all, we put the sc…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos