Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, we will see how to replace the turn signal bulbs of a Yamaha Xmax 125 with LED bulbs: we will start by removing the three screws around the right storage compartment, so that we can extract it and access the turn signal; in fact, once removed, we have ample access to the turn signal, so we first replace the relay with a two-pin one suitable for LED bulbs: we can find this component, for example, on eBay with the code 395805608000 at a price of 4.99 euros each, with free delivery. From the same compartment, we also access the bulb, which we replace with an LED one: we will do the same on the other side. To change the bulbs of the rear turn signals, we need to lift the seat, remove the two screws that fix it to the bodywork, and the central ones inside the helmet compartment, and the front connection one, in order to remove the entire storage compartment. In this way, we can easily access the bulbs, which we can replace.

Posted on 25 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Yamaha XMAX 125 Scooter?
How to Change the Engine Oil in a Yamaha XMAX 125 Scooter?
Xmax 125 In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 125 scooter, a very simple and quick operation to perform every 12 month…
How to replace the air filter on a Yamaha Xmax 125
How to replace the air filter on a Yamaha Xmax 125
Xmax 125 Today, let's discover the steps that will allow you to remove and replace the air filter of the engine on the Yamaha Xmax 125 scooter. First, place t…
How to replace the engine oil of the Yamaha Xmax 125.
How to replace the engine oil of the Yamaha Xmax 125.
Xmax 125 Briefly, we will see the steps that will allow us to replace the engine oil of the Yamaha Xmax 125 scooter. First, we place the scooter on the center…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos