Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Ttr 110

Model: Yamaha Ttr 110
Part: Battery

In order to replace the battery of the Yamaha TTR 110, you need to loosen the screw that secures the white panel on the left side of the bike, just below the seat: once this screw has been loosened, you can remove the panel and locate the battery underneath. This can be released from the corresponding strap, then disconnecting the corresponding power cables: at this point, you can insert the new battery so that it is properly secured and connected. You will then need to cover everything with the panel and check that everything is working.

Posted on 5 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Yamaha TTR 50?
How do you replace the battery of the Yamaha TTR 50?
Ttr 50 To replace the battery of the Yamaha TTR 50, you will need to loosen the screws that secure the rear fender to its housing: these screws will be loca…
How do you replace the battery of the Yamaha TTR 50?
How do you replace the battery of the Yamaha TTR 50?
Ttr 50 It will be possible to replace the battery of the Yamaha TTR 50 by loosening the screws that secure the motorcycle seat to its housing: once these fa…
How to Replace the Battery on a Yamaha TTR 125
How to Replace the Battery on a Yamaha TTR 125
Ttr 125 Today's guide will show you the steps to remove and replace the battery on the Yamaha TTR 125 enduro bike. First, place the bike on its stand and sta…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos