Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the brake and clutch levers of the Yamaha MT-07

Model: Yamaha Mt 07
Part:

Video tutorial

These short and simple steps will show us how to disassemble and replace the brake and clutch levers of the Yamaha MT-07 motorcycle. First, we put the motorcycle on the stand and start unscrewing the screw of the front brake lever in order to remove it; then we install the new front brake lever, adjusting the travel, as shown in the video.

At this point we remove the clutch lever, loosening the adjustment screw and disconnecting the cable from the lever; we replace it with the new original one and finally adjust the clutch lever play.


Posted on 7 July 2025 by ScegliAuto


Related tutorials

Mt 07 To replace the levers of the Yamaha MT-07, you need to loosen the screws that fix these levers to their housing on the side of the lever: once these …
Mt 07 How to replace the brake fluid on a Yamaha MT 07? Follow this guide to proceed with the replacement. Position the bike on a work stand, undo the secu…
Mt 07 You can replace the brake pads of the Yamaha MT-07 by loosening the screws that secure the brake caliper to its housing, adjacent to the disc: once t…

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos