|
Do it yourself
| |||
| ||||
|
Model: Yamaha Xmax 300
Following today's instructions, we will see how to reset the maintenance service light for the regular oil change of the Yamaha Xmax 300 scooter. First, put the scooter on the stand and start the instrument panel; then go to the engine oil section and press and hold the trip button (at the bottom right of the handlebar) to the left, until the service mileage counter reset is complete, as shown in the video. At this point, release the button and turn off the instrument panel, then start the engine!
Posted on 3 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Xmax 300
To reset the service light related to the oil change on a Yamaha XMAX 300, turn on the ignition and press the button on the handlebar to access the v…
Xmax 300
These brief and simple steps will show you how to reset the service maintenance light on the Yamaha Xmax 300 scooter. First, place the scooter on the…
Xmax 300
This short guide will show us how to reset the maintenance service light of the regular oil change for the Yamaha Xmax 300 scooter. First, we put the…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
