Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Nmax V2
Part:

In this short guide, we will see the instructions that will allow us to reset the transmission belt of the Yamaha Nmax V2 scooter. First, put the scooter on the center stand and start the instrument panel; then press the menu button until you reach the flashing v-belt option, as shown in the video. At this point, hold down the same button until the reset of the transmission belt replacement light is complete, then turn off the instrument panel and start the engine!

Posted on 21 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on the Yamaha Nmax V2
How to Replace the Battery on the Yamaha Nmax V2
Nmax V2 Today, we will discover the instructions that will allow us to remove and replace the battery of the Yamaha Nmax V2 scooter. First, place the scooter…
How to Reset the Belt Change Light on a Yamaha Nmax V2
How to Reset the Belt Change Light on a Yamaha Nmax V2
Nmax V2 The information in this guide will allow you to reset the belt change light on the Yamaha Nmax V2 scooter. First, place the scooter on its stand and …
How to Set the Time on a Yamaha NMAX V2 Scooter?
How to Set the Time on a Yamaha NMAX V2 Scooter?
Nmax V2 In this tutorial, we will see how to set the time on a Yamaha NMAX V2 scooter, a very simple and quick operation to perform after disconnecting the b…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos