Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Yamaha Nmax V2

Model: Yamaha Nmax V2
Part: Battery

Video tutorial

Today, we will discover the instructions that will allow us to remove and replace the battery of the Yamaha Nmax V2 scooter. First, place the scooter on its stand and begin by lifting the rider's seat; then remove the plastic cover underneath to access the battery compartment, as shown in the video.

At this point, disconnect both battery terminals (positive and negative), removing it from its compartment; replace it with a new one of the correct type and the same amperage, inserting it the right way and making the electrical connection.


Posted on 20 April 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Yamaha NMAX V2 Scooter?
How to Set the Time on a Yamaha NMAX V2 Scooter?
Nmax V2 In this tutorial, we will see how to set the time on a Yamaha NMAX V2 scooter, a very simple and quick operation to perform after disconnecting the b…
How to Reset the Belt Change Light on a Yamaha Nmax V2
How to Reset the Belt Change Light on a Yamaha Nmax V2
Nmax V2 The information in this guide will allow you to reset the belt change light on the Yamaha Nmax V2 scooter. First, place the scooter on its stand and …
How to reset the belt replacement indicator light on the Yamaha Nmax V2
How to reset the belt replacement indicator light on the Yamaha Nmax V2
Nmax V2 In this short guide, we will see the instructions that will allow us to reset the transmission belt of the Yamaha Nmax V2 scooter. First, put the sco…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos