Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Nmax V2
Part: Clock

In this tutorial, we will see how to set the time on a Yamaha NMAX V2 scooter, a very simple and quick operation to perform after disconnecting the battery or when switching to daylight saving time. First, insert the key, then turn on the instrument panel and hold the "MENU" button located behind the left knob until the clock starts to flash. Next, adjust the hour by quickly pressing the button, hold it again to switch to minutes, and similarly adjust them before finally saving the setting.

Posted on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Belt Change Light on a Yamaha Nmax V2
How to Reset the Belt Change Light on a Yamaha Nmax V2
Nmax V2 The information in this guide will allow you to reset the belt change light on the Yamaha Nmax V2 scooter. First, place the scooter on its stand and …
How to Replace the Battery on the Yamaha Nmax V2
How to Replace the Battery on the Yamaha Nmax V2
Nmax V2 Today, we will discover the instructions that will allow us to remove and replace the battery of the Yamaha Nmax V2 scooter. First, place the scooter…
How to reset the belt replacement indicator light on the Yamaha Nmax V2
How to reset the belt replacement indicator light on the Yamaha Nmax V2
Nmax V2 In this short guide, we will see the instructions that will allow us to reset the transmission belt of the Yamaha Nmax V2 scooter. First, put the sco…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos