|
Do it yourself
| |||
| ||||
|
Model: Yamaha Nmax 125
The instructions in this guide will show us how to reset the regular maintenance (service) warning of the Yamaha Nmax 125 scooter. First, we put the scooter on the stand and start the instrument panel; we will then see the engine oil light flashing, as shown in the video. At this point, we press the left button until we reach the trip option, holding down the reset button until the regular maintenance warning is correctly reset, as shown in the video. Now we turn off the instrument panel and start the engine!
Posted on 21 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Nmax 125
In this tutorial, we will see how to reset the service on the Yamaha NMAX 125 scooter, a very simple and quick operation to perform only after comple…
Nmax 125
Resetting the service light on the Yamaha NMAX 125 scooter, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensur…
Nmax 125
In this tutorial, we will see how to reset the service on the Yamaha NMAX 125 scooter, a very simple and quick operation that should be done only aft…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
