Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant in the Yamaha Fazer FZ6

Model: Yamaha Fazer
Part: Antifreeze coolant

Video tutorial

In this video, we see how to change the coolant of a Yamaha Fazer FZ6: we remove the cap from the coolant reservoir, and then remove the cap from the bottom part which, unlike the youtuber, we will collect in a specific container, and dispose of it properly at an authorized center.

After all the coolant has drained, we plug the hole from which it has poured out, take the coolant with which we need to replace the one we removed, which must meet the specifications indicated in the owner's manual of our motorcycle, and which must be consistent with the climatic characteristics of our country.

With the help of a funnel, we insert a smaller amount of coolant, compared to the one indicated in the owner's manual, and then visually check it. We put the cap back in place and drive a few kilometers to allow the coolant to reach the optimal level.


Posted on 19 October 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Yamaha Fazer?
How to Change the Engine Oil on the Yamaha Fazer?
Fazer You can change the engine oil on the Yamaha Fazer by loosening the drain plug located at the central bottom of the bike. Once unscrewed, allow all th…
How to Replace the Battery in a Yamaha Fazer
How to Replace the Battery in a Yamaha Fazer
Fazer In this tutorial, you will see how to replace the battery in a Yamaha Fazer, a very simple and quick operation. First, ensure that the key is not in …
How to replace the motor oil in the Yamaha Fazer 1000?
How to replace the motor oil in the Yamaha Fazer 1000?
Fazer In this tutorial we can see how to replace the engine oil in the Yamaha Fazer 1000, an extremely simple and fast operation. First of all, we wait for…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos