Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Neo S 50
Part:

Today we will explain how to open the seat of the Yamaha Neo S 50 scooter when we have lost the keys using two different methods. The first method consists of the following steps: The first step to take is to remove the rear part of the bodywork, using a Torx screwdriver. The second step to take is to remove the rear light by unscrewing the central screw. The third step to take is to insert a flat-tipped screwdriver inside the upper plastic to lever from the inside and open the seat. These steps do not damage the seat lock so you will not have to replace it later. The second method consists of the following steps: The first step to take is to remove the front bodywork of the scooter using a Torx key. The second step to take is to disconnect the connector related to the central front headlight in order to remove the entire dashboard. The third step to take is to remove the central tube screw, which will allow the seat to open.

Posted on 28 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Drive Belt on the Yamaha NEO's 50 Scooter?
How to Replace the Drive Belt on the Yamaha NEO's 50 Scooter?
Neo S 50 In this tutorial, you will see how to replace the drive belt on the Yamaha NEO's 50 scooter, a simple operation if you have good manual skills. First…
Guide to replacing the belt of the Yamaha Neo S 50
Guide to replacing the belt of the Yamaha Neo S 50
Neo S 50 Below we will see the process of disassembling and replacing the transmission belt of the Yamaha Neo S 50 scooter. First, we put the scooter on the c…
Resetting the Engine Oil Change Warning Light on Yamaha Neo S 50
Resetting the Engine Oil Change Warning Light on Yamaha Neo S 50
Neo S 50 Today's instructions will show you how to reset the service warning light for the engine oil change on the Yamaha Neo S 50 scooter. First, place the …

How to Reset the Oil Light on a Honda PCX 160

In this mini guide, discover the steps to manually reset the oil light on the central display of your Honda PCX 160. First, turn on the ignition with the key and press both the 'Sel' and 'Set' buttons located below it simultaneously. When the time starts to flash, hold 'Sel' until the oil indicator flashes, then press the 'Set' button once. To complete the reset, hold 'Sel' again until the operation is finished.

Watch the video!


by ScegliAuto

More videos