Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Tmax 560
Part: Battery

The 12-volt power battery of the Yamaha Tmax 560, which we can see in the images in the video posted here, is located at the front of the maxi scooter, on the left side. The disassembly does not require complex operations; in fact, just below the left handlebar grip, there is a small compartment covered by a plastic panel. We need to remove this panel by unscrewing the screws that secure it, thus gaining access to the battery in question. Using the appropriate tools, we will disconnect the two terminals, negative first and then positive, finishing the job by pulling the battery out.

Posted on 21 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Yamaha TMAX 560 Scooter
How to Replace the Battery in a Yamaha TMAX 560 Scooter
Tmax 560 In this tutorial, you will see how to replace the battery in the Yamaha TMAX 560 scooter, a very simple and quick operation. First, ensure that the k…
How to Change the Engine Oil on a Yamaha TMAX 560 Scooter
How to Change the Engine Oil on a Yamaha TMAX 560 Scooter
Tmax 560 Changing the engine oil on a Yamaha TMAX 560 scooter, as shown in this tutorial, is a very simple and quick task. First, ensure the engine is cool en…
How to Reset the Service on a Yamaha TMAX 560 Scooter?
How to Reset the Service on a Yamaha TMAX 560 Scooter?
Tmax 560 In this tutorial, we will see how to reset the service on the Yamaha TMAX 560 scooter, a very simple and quick operation, to be performed only after …

How to replace the headlight bulbs on a Suzuki GSXR 600?

In this tutorial, you will see how to replace the headlight bulbs on a Suzuki GSXR 600, an extremely simple and quick operation. First, ensure that the key is not inserted, then unscrew the two indicated screws and separate the dashboard from the support. Next, disconnect the power connectors of the bulbs, remove the rubber caps, and unclip the metal clips to extract the bulbs from their respective housings. At this point, you can insert the replacements, avoiding touching the glass directly with your bare hands, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos