Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Sr 400

In this tutorial, we will see how to replace the headlight bulb on the Yamaha SR 400, a very simple and quick operation. First of all, let's make sure that the key is not inserted, so we can work safely. Then, we locate the two screws located at the bottom of the headlight and unscrew them using a cross-head screwdriver. Next, we grab the headlight, separate it from the base, and disconnect the power connector. At this point, we just need to remove the rubber cover, unclip the metal clip, replace the bulb, and reassemble everything by following the reverse procedure.

Posted on 28 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the motor oil in the Yamaha SR 400?
How to replace the motor oil in the Yamaha SR 400?
Sr 400 In this tutorial we can see how to replace the engine oil in the Yamaha SR 400, an extremely simple and quick operation. First of all, we wait for th…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos