Do it yourself
Frequently asked questions about cars and motorcycles
How to replace the engine air filter on a Yamaha Xmax 250 scooter? Follow this guide to proceed with the replacement. Position the scooter on the centre stand and use a screwdriver to remove the screws around the filter container. After removing the screws, uncover the lid and take out the air filter. If damaged, place a new one; otherwise, clean the old one using compressed air. Finally, close the air filter container and screw in the locking screws with the screwdriver.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Xmax 250 Discover the procedure necessary to replace the engine oil and oil filter while performing the routine maintenance service on the Yamaha Xmax 250 sco…
Xmax 250 This guide provides instructions for removing and replacing the spark plug of the engine on the Yamaha Xmax 250 scooter, as well as the Xmax 125. Fir…
Xmax 250 In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 month…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos