|
Do it yourself
| |||
| ||||
How to Remove the Spark Plug on a Yamaha YP 250R
Model: Yamaha Yp 250r
Video tutorial
Open the seat and remove the bolts securing the engine cover, then pull off the engine cover to locate the spark plug. Before unscrewing the spark plug, remove the bracket holding the tube that may obstruct the spark plug removal. Pull the spark plug cap and, using a spanner, unscrew it by turning counter-clockwise.
Updated on 8 March 2026 by ScegliAuto
Related tutorials
Fz1
Hello, today focus on replacing the spark plug in your Yamaha FZ1. First, remove the side fairings of the bike. Next, disconnect the cable connecting…
Yzf R6
Good morning, today you will focus on replacing the spark plug on your Yamaha YZF-R6. Start by removing the side fairings of the bike. Next, carefull…
(Various brands) Various
To change the spark plug on the Yamaha Majesty 250 motorcycle, remove the under-seat panel by unscrewing the four 10mm bolts as shown in the video. T…
|
How to Dismantle the Centre Fairing of the Piaggio MP3
Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
