Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on Yamaha Xmax 300

Model: Yamaha Xmax 300
Part: Service warning light

Video tutorial

These brief steps will allow you to reset the service light for the regular maintenance oil change on the Yamaha Xmax 300 scooter. First, place the scooter on the stand and turn on the instrument panel; then use the menu buttons located on the handlebars to access the computer settings, navigating to the maintenance section and then to the engine oil section, as shown in the video.

At this point, confirm and perform the reset of the service and maintenance warning from the instrument panel!


Posted on 29 March 2026 by ScegliAuto


Related tutorials

Resetting the Maintenance Light on Yamaha Xmax 300
Resetting the Maintenance Light on Yamaha Xmax 300
Xmax 300 These brief and simple steps will show you how to reset the service maintenance light on the Yamaha Xmax 300 scooter. First, place the scooter on the…
How to reset the service light on the Yamaha Xmax 300
How to reset the service light on the Yamaha Xmax 300
Xmax 300 Below is the procedure to reset the maintenance light for the engine oil change on the Yamaha Xmax 300 scooter. First, place the scooter on the centr…
Resetting the service light on the Yamaha Xmax 300
Resetting the service light on the Yamaha Xmax 300
Xmax 300 Today, we will go through the instructions on how to reset the service light for the regular maintenance oil change on the Yamaha Xmax 300 scooter. F…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos