Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Fjr 1300
Part: Shocks

To replace the rear shock absorber on a Yamaha FJR 1300, loosen the screws that secure it to its housing: these screws will be located at the top and bottom of the shock absorber itself and can be loosened from the side of the bike. You can then proceed to pull the component from its seat to insert the new spare part: the latter must be secured with screws at both the bottom and top to ensure everything functions correctly after the replacement.

Posted on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fjr 1300 If you own the new Yamaha FJR 1300 2023 and want to find out where the fuse box is located, read this guide carefully and follow a few simple steps. …
Fjr 1300 Today, let's go through the steps to remove and replace the battery in a Yamaha FJR 1300 motorcycle. First, place the motorcycle on its centre stand …
Fjr 1300 To replace the headlight bulb on the Yamaha FJR 1300, loosen the screws securing the front fairing of the motorcycle so that it can be completely rem…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos