Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Tracer 700
Part: Battery

In this tutorial, you will see how to replace the battery in a Yamaha Tracer 700 GT, a very simple and quick operation. First, ensure that the instrument panel is off for safety, then remove the seat, unscrew the negative terminal bolt with a cross-head screwdriver, and disconnect it. Repeat the operation for the positive terminal, unclip the securing strap, and remove the old battery from its housing. At this point, simply insert the replacement and reassemble everything by following the reverse procedure.

Posted on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on the Yamaha Tracer 700?
How do you set the clock on the Yamaha Tracer 700?
Tracer 700 The clock adjustment of the Yamaha Tracer 700 is done by turning on the instrument panel, inserting the key into the ignition switch: once the panel …
How do you replace the battery of the Yamaha Tracer 700?
How do you replace the battery of the Yamaha Tracer 700?
Tracer 700 In order to replace the battery of the Yamaha Tracer 700, you need to loosen the screws that secure the motorcycle seat to its housing: once this has…
Setting the time on Yamaha Tracer 700
Setting the time on Yamaha Tracer 700
Tracer 700 Let's see through this very short tutorial how to adjust the time of the onboard computer on our Yamaha Tracer 700. Let's start by turning on the veh…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos