Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Remove the plastic side panels covering the radiator on both sides, loosen the bolts of the collectors (2 per collector) using a 12mm spanner. To perform this operation on the outer bolts, use the space freed by removing the side panels, while it is advisable to use the floor as a cushion to unscrew the inner bolts. Completely unscrew the sensor located under the rear brake lever with a 17mm spanner. Completely unscrew the supports of the footpegs (brake and gear) on both the right and left sides. Unscrew the supports of the exhaust 'padellone' on both the right and left sides. Return to the collectors and fully unscrew everything, being careful not to lose the two gaskets present. Fit the new collector.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on the Yamaha MT-07?
How to Replace the Exhaust on the Yamaha MT-07?
Mt 07 To replace the exhaust on the Yamaha MT-07, loosen the bolts that secure it to the appropriate supports: these bolts are located at the bottom of the…
How to Replace the Exhaust on a Yamaha MT 07
How to Replace the Exhaust on a Yamaha MT 07
Mt 07 To replace the exhaust on the Yamaha MT 07, loosen the bolts securing it to the supports. These bolts are located at the bottom of the bike and must …
How to Replace the Exhaust on the Yamaha MT-07?
How to Replace the Exhaust on the Yamaha MT-07?
Mt 07 You can replace the exhaust on the Yamaha MT-07 by loosening the bolts that secure the exhaust terminal to its housing, located at the bottom of the …

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos