Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Yamaha YZF-R6

Model: Yamaha Yzf R6
Part: Clutch

Video tutorial

In this guide, we will cover the main steps to remove and replace the clutch discs on a Yamaha YZF-R6 motorcycle. First, place the bike on a stand and begin removing the side plastic fairings by unscrewing the screws; drain the engine oil by unscrewing the drain bolt found on the oil sump.

At this point, remove the side cover of the clutch by unscrewing the screws and disconnecting the clutch cable; unscrew the bolts of the clutch pack to remove each disc one by one, replacing them with new ones while alternating the insertion of the two different types of discs.


Posted on 9 June 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Clutch on a Yamaha YZF-R6
Guide to Replacing the Clutch on a Yamaha YZF-R6
Yzf R6 Today, let's discover the instructions that will allow you to remove and replace the clutch discs on a Yamaha YZF-R6. First, place the bike on a stan…
How to Replace the Clutch on the Yamaha YZF-R6
How to Replace the Clutch on the Yamaha YZF-R6
Yzf R6 To replace the clutch on the Yamaha YZF-R6, loosen the screws securing the cover on the right side of the bike, just below the seat. Once the screws …
How to Replace the Clutch on a Yamaha YZF-R6
How to Replace the Clutch on a Yamaha YZF-R6
Yzf R6 Today, we will go through the instructions for removing and replacing the clutch discs on a Yamaha YZF-R6 motorcycle. First, place the motorcycle on …

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos