Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Yzf R6
Part: Clutch

Today, let's discover the instructions that will allow you to remove and replace the clutch discs on a Yamaha YZF-R6. First, place the bike on a stand and begin removing the side plastic fairings, thus accessing the clutch cover; drain the engine oil and undo the screws of the cover, as shown in the video. At this point, undo the screws of the clutch pack, removing each disc one by one; replace them with new original ones, alternating the two different types of clutch discs. Finally, refit the clutch cover and the side casing!

Posted on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Yzf R6 To replace the clutch on the Yamaha YZF-R6, loosen the screws securing the cover on the right side of the bike, just below the seat. Once the screws …
Yzf R6 In this guide, we will cover the main steps to remove and replace the clutch discs on a Yamaha YZF-R6 motorcycle. First, place the bike on a stand an…
Yzf R6 This video will illustrate the procedure for removing and replacing the clutch on a Yamaha R6, following the instructions below. First, place the bik…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos