Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Yfz450f
Part: Engine oil

Descriptive guide for changing the engine oil and oil filter of a Yamaha YFZ450. Obtain 2L of Motul 5100 SAE 10W40 oil and an Hiflo HF140 filter. Place a container for collecting the oil under the engine. Using a 12mm spanner, unscrew the oil drain plug located at the bottom of the engine casing, on the left side. Using a ratchet and a 10mm socket, unscrew the three screws securing the oil filter cover on the right side of the engine. Replace the filter and re-screw the cover and drain plug. Open the oil filler cap located on the left side of the engine casing. Pour in the oil using a funnel (0.95L) into the oil reservoir located in front of the engine.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Yfz450f In order to disassemble the engine of the Yamaha YZF450, you will need to loosen the screws that secure the block to its housing, so that you can the…
Yfz450f To replace the clutch on a Yamaha YFZ 450, loosen the screws that secure the protective cover on the right side of the bike. Once the screws are loos…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos