Do it yourself
Frequently asked questions about cars and motorcycles
Today, we will discover the instructions to remove and replace the front headlight bulb on a Yamaha FZ6 Fazer. First, place the bike on its stand and begin by removing the rubber protective cap of the bulbs, located behind the headlight, accessing it from the bottom. Disconnect the electrical connector of the light and unclip the metal spring to remove the bulb, as shown in the video. At this point, install the new dipped beam bulb of the correct type and with the same fitting; reassemble and reconnect the dipped beam bulb.

Posted on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fz6 Fazer Today, you will follow the guide and procedure necessary for removing and replacing the battery of the Yamaha FZ6 Fazer, as well as the base version …
Fz6 Fazer In this brief and simple guide, learn how to remove and replace the front brake pads on a Yamaha FZ6 Fazer motorcycle. First, place the stand on your…
Fz6 Fazer In this video, you will learn how to remove and replace the engine air filter on a Yamaha FZ6 Fazer, which is also valid for the FZ6. First, remove t…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos