Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Fz6 Fazer
Part: Wheel

In this video, learn how to remove the front wheel on a Yamaha FZ6 Fazer by following these simple and quick steps. First, find a way to lift the bike at the front, using a suitable stand or lifting it by the engine; then unscrew the fork bolts and use a 24 mm socket to unscrew the central axle bolt of the wheel, as shown in the video. Next, unscrew the bolts of the front brake calipers to remove them; all that's left is to slide out the central axle and gently remove the wheel!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Battery of the Yamaha FZ6 Fazer
Guide to Replacing the Battery of the Yamaha FZ6 Fazer
Fz6 Fazer Today, you will follow the guide and procedure necessary for removing and replacing the battery of the Yamaha FZ6 Fazer, as well as the base version …
Replacing the coolant on a Yamaha FZ6 Fazer
Replacing the coolant on a Yamaha FZ6 Fazer
Fz6 Fazer Today's instructions will allow you to replace the coolant in the engine of the Yamaha FZ6 Fazer. First, place the motorcycle on a stand and start un…
How to Replace the Starter Motor on a Yamaha FZ6 Fazer
How to Replace the Starter Motor on a Yamaha FZ6 Fazer
Fz6 Fazer In this video, you will see the instructions for removing and replacing the starter motor on a Yamaha FZ6 Fazer. First, remove the seat of your motor…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos