Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Yamaha FZ6 Fazer

Model: Yamaha Fz6 Fazer
Part: Starter motor

Video tutorial

In this video, you will see the instructions for removing and replacing the starter motor on a Yamaha FZ6 Fazer. First, remove the seat of your motorcycle, then proceed to remove the fuel tank; to do this, undo the fixing screws found on both the upper and lower parts.

At this point, use a 10 mm spanner to undo the screw that holds the starter motor, then disconnect its electrical connector; once removed, you can replace it with the new one by applying the reverse procedure of disassembly!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Battery of the Yamaha FZ6 Fazer
Guide to Replacing the Battery of the Yamaha FZ6 Fazer
Fz6 Fazer Today, you will follow the guide and procedure necessary for removing and replacing the battery of the Yamaha FZ6 Fazer, as well as the base version …
Replacing the coolant on a Yamaha FZ6 Fazer
Replacing the coolant on a Yamaha FZ6 Fazer
Fz6 Fazer Today's instructions will allow you to replace the coolant in the engine of the Yamaha FZ6 Fazer. First, place the motorcycle on a stand and start un…
How to Replace the Coolant in the Yamaha FZ6 Fazer
How to Replace the Coolant in the Yamaha FZ6 Fazer
Fz6 Fazer This guide shows you how to drain and refill the engine coolant of the Yamaha FZ6 Fazer motorcycle. First, place the bike on its centre stand and sta…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos