Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Tmax
Part: Tail light

In this video, you will see how to remove the rear light from a Yamaha Tmax to access the bulbs for replacement. To remove the light, first unscrew the screws located under the seat, then unscrew the screws found in the number plate lights: next, unscrew the screws located under the rear light and remove the light as shown in the video. At this point, you can replace the bulbs if needed by twisting them to extract. Follow the video to the end for reassembly!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Fairing and Front Plastics on Yamaha Tmax
Removing the Fairing and Front Plastics on Yamaha Tmax
Tmax Today, you will learn how to remove the windscreen and front plastics on a Yamaha Tmax. First, unscrew the fixing screws for the front plastics, whic…
Removing the Front Wheel of a Yamaha Tmax
Removing the Front Wheel of a Yamaha Tmax
Tmax In this video tutorial, you will learn how to remove the front wheel of a Yamaha Tmax 530 (penultimate series). First, remove the fork bolts using a …
How to replace the battery of the Yamaha Tmax
How to replace the battery of the Yamaha Tmax
Tmax In this guide, we will see the step-by-step instructions that will allow us to disassemble and replace the battery of the Yamaha Tmax scooter. First,…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos