Do it yourself
Frequently asked questions about cars and motorcycles

Oil Change on Yamaha Mio 125

Model: Yamaha Mio
Part: Engine oil

Video tutorial

For this scooter model, it is recommended to use synthetic 4-stroke oil 10W-40. The oil drain bolt is located at the bottom, specifically on the left side of the scooter, as you can see in the video. Therefore, unscrew the aforementioned 17 mm bolt with a socket and collect the used oil in a container.

My advice is to perform this operation after running the engine for several minutes: this will warm the circulating oil, reducing its viscosity and facilitating drainage. Close the drain hole and fill with the same quantity of new oil through the designated hole on the right side of the scooter.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Mio For this model, it is recommended to use synthetic oil for 2-stroke engines 15W-40. Start the engine for a few minutes to warm up the circulating oil…
Mio Today, you will learn how to quickly change the oil on a Sym Mio 115 scooter without visiting your trusted mechanic. Use a 17 mm spanner to remove th…
Mio In this tutorial, you can see how to replace the remote battery on the Yamaha MIO I 125S scooter, a very simple and quick operation. For this, you wi…

How to Replace the Fuel Filter on the MV Agusta Brutale 920?

To replace the fuel filter on the MV Agusta Brutale 920, loosen the screws that secure the fuel tank to its housing: once the screws securing the tank, hoses, and connectors have been loosened, you can completely remove the tank and then locate the fuel pump underneath. At this point, loosen the screws that secure the pump, remove it, and locate the fuel filter attached to it: this will allow you to replace it by inserting the new replacement part.

Watch the video!


by ScegliAuto

More videos