Do it yourself
Frequently asked questions about cars and motorcycles

Oil Change on a Yamaha Mio

Model: Yamaha Mio
Part: Engine oil

Video tutorial

For this model, it is recommended to use synthetic oil for 2-stroke engines 15W-40. Start the engine for a few minutes to warm up the circulating oil, making it less viscous for easier draining. Using a 17 mm socket, unscrew the bolt that acts as the plug for the lower drain hole.

Collect the used oil in a container and dispose of it properly. While you're at it, you can also unscrew the drain bolt from the variator and let the oil drain from there as well.

Refit both bolts, unscrew the rocker cover, and pour in the new oil. Good luck!


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Mio For this scooter model, it is recommended to use synthetic 4-stroke oil 10W-40. The oil drain bolt is located at the bottom, specifically on the left…
Mio Today, you will learn how to quickly change the oil on a Sym Mio 115 scooter without visiting your trusted mechanic. Use a 17 mm spanner to remove th…
Mio To replace the rear wheel on the Yamaha Mio, loosen the bolts securing the exhaust on the right side of the bike, removing it from its supports and t…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos