Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xt 660
Part:

Before proceeding with the replacement of the cushion drives (this replacement is necessary when there is a slight play in the rotation between the wheel and the chain sprocket) in the Yamaha AT 660X, it is best to secure the bike in a stable position to ensure the operator's safety. Then, remove the rear wheel and simply slide off the sprocket. Inside, you will find the old cushion drives, which you should remove. Now, clean the inside of the drive joint housing and fit the new joints. Refit the sprocket and reassemble the wheel, and you're done!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Yamaha XT 600?
How to Change the Engine Oil in a Yamaha XT 600?
Xt 660 In this tutorial, you will see how to change the engine oil in a Yamaha XT 600, a very simple and quick operation. First, ensure that the engine is c…
How to Change the Air Filter on the Yamaha XT 660 Z
How to Change the Air Filter on the Yamaha XT 660 Z
Xt 660 This guide shows how to remove and replace the air filter of the Yamaha XT 660 Z engine, following the instructions below. First, place your bike on …
How to Replace the Air Filter on a Yamaha XT 660 R
How to Replace the Air Filter on a Yamaha XT 660 R
Xt 660 This guide shows you how to remove and replace the engine air filter on a Yamaha XT 660 R by following these simple steps. First, remove the rider an…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos