|
Do it yourself
| |||
| ||||
Model: Yamaha Xt 660
In this tutorial, you will see how to change the engine oil in a Yamaha XT 600, a very simple and quick operation. First, ensure that the engine is cool enough to work safely, then position a container beneath the bike, locate the drain hole bolt, and unscrew it using a 17mm socket. Allow all the oil in the system to drain out, then open the filter cap with a 5mm hex key and insert the replacement. Finally, pour the required amount of oil through the designated top hole.
Posted on 1 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Xt 660
Descriptive guide for replacing the engine oil and oil filter on a Yamaha XT660. Obtain 3 litres of Motul 7100 SAE 10W40 oil and a HIFLO HF145 oil fi…
Xt 660
This guide explains how to bleed and top up the engine coolant for the Yamaha XT 660 and XT 660Z motorcycles. First, remove the plastic cover on the …
Xt 660
This guide shows you how to remove and replace the engine air filter on a Yamaha XT 660 R by following these simple steps. First, remove the rider an…
|
How to Replace the Windscreen of the Kymco CV3?
To replace the windscreen of the Kymco CV3, loosen the four screws located on the outer part of the windscreen: once these screws are loosened, you can completely detach the windscreen from its housing, allowing you to insert the new one. After installation, secure the new windscreen by reinserting the appropriate screws on the outer part; this way, ensure that the new replacement part is fitted correctly and does not cause any issues or difficulties while riding the scooter. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |