Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha T Max
Part:

To fit the Termoscud R189PRO X on the Yamaha T Max, first ensure the operator's safety by securing the scooter in a stable and safe position that allows you to work comfortably. Now, the first task is to attach the two profiles at the front of the footboard, included with the shield. To do this, uncover the two screws (on each side) under the plastic protection mat, unscrew them, and fix the profiles using the supplied screws. At this point, position the shield on the seat with the logos facing the handlebars. Bring the shield close to the steering head. Remove the original fasteners of the scooter by simply pushing and pulling them out. Replace them with the ones provided with the shield. Next, secure the straps using the screws indicated in the images. Now, adhere the side/lower parts to the previously mounted profiles, ensuring the seal fits well against the profile. Attach the straps to the bottom of the footboard. Finally, inflate the termoscud to prevent flapping.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the drive chain tensioner of the Yamaha T-Max.
Replacement of the drive chain tensioner of the Yamaha T-Max.
T Max Today's main instructions will show us how to disassemble and replace the chain tensioner of the transmission chain of the Yamaha T-Max scooter. Firs…
How to Replace the Drive Belt on a Yamaha T-Max
How to Replace the Drive Belt on a Yamaha T-Max
T Max Before you start, position your Yamaha T-Max on the centre stand. Begin by removing the right side fairings by unscrewing the securing screws. Next, …
Battery Replacement for the Yamaha T-Max 500
Battery Replacement for the Yamaha T-Max 500
T Max In this brief and simple guide, you will find the main instructions for removing and replacing the battery of the Yamaha T-Max 500 scooter. First, mo…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos