Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Aerox
Part: Tail light

On the Yamaha Aerox scooter, removing the side indicators is very simple: just unscrew the two small screws that are clearly visible from the outside and are meant to secure the light unit. Once unscrewed, you can remove the outer casing of the light and extract the bulb by unscrewing it slightly. Similarly, insert the new bulb by screwing it in a little and you're done. The replacement of the rear bulb is done in exactly the same way: here too there are only two screws to unscrew and the light unit will come out, allowing you to replace the bulb. Nothing could be easier.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Indicators on a Yamaha Aerox
How to Replace the Rear Indicators on a Yamaha Aerox
Aerox In this brief guide, we will see how to remove the rear indicators and the rear light of the Yamaha Aerox scooter. First, open and lift the seat of y…
How to Replace the Number Plate Light on the Yamaha Aerox Scooter?
How to Replace the Number Plate Light on the Yamaha Aerox Scooter?
Aerox In this tutorial, we will see how to replace the number plate light bulb on the Yamaha Aerox scooter, a very simple and quick operation. Before proce…
Guide to Replacing the Front Headlight Bulb on a Yamaha Aerox 155
Guide to Replacing the Front Headlight Bulb on a Yamaha Aerox 155
Aerox Here’s a guide to help you remove and replace the headlight bulb or the entire headlight unit on the Yamaha Aerox 155 scooter. First, place your scoo…

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos