|
Do it yourself
| |||
| ||||
|
Model: Yamaha R1 Yamaha
In this video tutorial, you will learn how to remove the front fairing of the headlamp on a Yamaha R1 in simple and quick steps. First, unscrew the fixing screws located on the back of the shield using a Torx screwdriver; then disconnect the electrical connectors for the indicators located underneath, as shown in the video. At this point, unscrew the two fixing bolts for the mirror to remove it; then gently unclip the front fairing for replacement. Apply the reverse procedure for reassembly!
Updated on 20 April 2026 by ScegliAuto
Video tutorial
Related tutorials
R1 Yamaha
In this tutorial, you will see how to remove the fairing on the Yamaha R1, a very simple and quick operation. First, use a 10mm socket to undo the tw…
R1 Yamaha
In this tutorial, we can see how to remove the rear fairing on the Yamaha R1, an extremely simple and quick operation. First, remove the passenger se…
R1 Yamaha
In today's video, you will see how to bleed the cooling system and replace the antifreeze on a 2007 Yamaha R1 in simple steps. First, bleed the old c…
|
How to Service the Beta RR 350
This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
