Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Xt 125x

Model: Yamaha Xt 125x
Part: Clutch

Discover in this guide how to remove and replace the clutch plates of the Yamaha XT 125x in simple and quick steps. First, drain the engine oil from your bike by unscrewing the drain bolt located under the engine; then remove the starter motor by unscrewing the screws and disconnecting the power cables. At this point, unscrew the screws of the clutch cover to remove it; then unscrew the screws of the clutch pack to remove the cork plates. Finally, reassemble the new clutch, following the video to the end!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Yamaha YZF-R6
How to Replace the Clutch on a Yamaha YZF-R6
Yzf R6 Today, we will go through the instructions for removing and replacing the clutch discs on a Yamaha YZF-R6 motorcycle. First, place the motorcycle on …
How to Replace the Clutch on the Yamaha R3?
How to Replace the Clutch on the Yamaha R3?
Yamaha R3 To replace the clutch on the Yamaha R3, you need to loosen the screws securing the cover on the right side of the vehicle. Once the screws are loosen…
Replacing the Clutch on a Yamaha YZF R6
Replacing the Clutch on a Yamaha YZF R6
Yzf R6 This video will illustrate the procedure for removing and replacing the clutch on a Yamaha R6, following the instructions below. First, place the bik…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos