Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Yamaha YZF R1

Model: Yamaha Yzf R1
Part: Battery

This video is currently unavailable

In today's video tutorial, you will learn how to remove and replace the battery on a Yamaha YZF R1 by following these simple steps. First, remove the rider's seat from the motorcycle; underneath, you will find the battery, where you will unscrew the terminal bolts (positive and negative) to extract and remove the battery, as shown in the video.

Now replace the battery with a new one of the correct type and the same amperage as the original; then reconnect the electrical connections and reassemble everything!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Yamaha YZF R1?
How to Change the Engine Oil on a Yamaha YZF R1?
Yzf R1 In this tutorial, you will see how to change the engine oil on a Yamaha YZF R1, a very simple and quick operation. First, wait until the engine is su…
How to Replace the Clutch on the Yamaha YZF-R1
How to Replace the Clutch on the Yamaha YZF-R1
Yzf R1 You can replace the clutch on the Yamaha YZF-R1 by loosening the screws that secure the transmission cover located on the right side of the motorcycl…
How do you replace the exhaust pipe of the Yamaha YZF-R1?
How do you replace the exhaust pipe of the Yamaha YZF-R1?
Yzf R1 It will be possible to replace the muffler that is installed at the rear wheel of the Yamaha YZF-R1 by loosening the screws that fix it to the corres…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos