Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exhaust pipe of the Yamaha YZF-R1?

Model: Yamaha Yzf R1
Part: Exhaust muffler

Video tutorial

It will be possible to replace the muffler that is installed at the rear wheel of the Yamaha YZF-R1 by loosening the screws that fix it to the corresponding supports: once the fixing screws in question have been loosened, it will be possible to proceed by widening the connecting clamp placed between the muffler and the collector to allow the old terminal to be removed.

The new replacement part can then be inserted into its seat, connecting and fixing it with the screws: at this point, it can be verified that everything works correctly.


Posted on 3 September 2025 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Yamaha YZF R-1?
How to Replace the Exhaust on a Yamaha YZF R-1?
Yzf R1 To replace the exhaust on a Yamaha YZF R-1, loosen the screws securing the seat and the corresponding rear cover, so that these two parts can be deta…
How to Change the Engine Oil in a Yamaha YZF R1?
How to Change the Engine Oil in a Yamaha YZF R1?
Yzf R1 In this tutorial, see how to change the engine oil in a Yamaha YZF R1, an extremely simple and quick operation. First, wait until the engine is suffi…
How to Remove the Rear Wheel of a Yamaha YZF R1
How to Remove the Rear Wheel of a Yamaha YZF R1
Yzf R1 Here are the instructions to remove and replace the rear wheel and tyre of the Yamaha YZF R1. First, place the motorcycle on a stand and lift the rea…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos