Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a Yamaha YZF R-1?

Model: Yamaha Yzf R1
Part: Exhaust muffler

Video tutorial

To replace the exhaust on a Yamaha YZF R-1, loosen the screws securing the seat and the corresponding rear cover, so that these two parts can be detached. Once these components are removed, you will be able to locate the screws for the exhaust supports underneath.

By loosening these screws and then widening the ring that connects the exhaust to the exhaust manifold, you can completely detach the exhaust from its housing. The new exhausts can then be inserted, connecting the ring and securing the exhausts to the supports.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Yamaha YZF-R1?
How do you replace the exhaust pipe of the Yamaha YZF-R1?
Yzf R1 It will be possible to replace the muffler that is installed at the rear wheel of the Yamaha YZF-R1 by loosening the screws that fix it to the corres…
How to Change the Engine Oil in a Yamaha YZF R1?
How to Change the Engine Oil in a Yamaha YZF R1?
Yzf R1 In this tutorial, see how to change the engine oil in a Yamaha YZF R1, an extremely simple and quick operation. First, wait until the engine is suffi…
How to Change the Engine Oil on a Yamaha YZF R1?
How to Change the Engine Oil on a Yamaha YZF R1?
Yzf R1 In this tutorial, you will see how to change the engine oil on a Yamaha YZF R1, a very simple and quick operation. First, wait until the engine is su…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos