Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this short and simple guide, learn how to carry out the routine maintenance oil change service on your Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container; unscrew the two screws on the cover to remove and replace the filter cartridge with a new one, as shown in the video. Next, replace the air filter by unscrewing the screws on the cover; finally, pour in the new engine oil!

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Yamaha XMAX 300
How to Reset the Service Light on Yamaha XMAX 300
Xmax 300 To reset the service light related to the oil change on a Yamaha XMAX 300, turn on the ignition and press the button on the handlebar to access the v…
Resetting the service indicator light on the Yamaha Xmax 300
Resetting the service indicator light on the Yamaha Xmax 300
Xmax 300 In this guide we will see how to reset the engine oil change indicator light (service) of the Yamaha Xmax 300 scooter. First, we put the scooter on t…
Reset the service notification of the Yamaha Xmax 300.
Reset the service notification of the Yamaha Xmax 300.
Xmax 300 The following steps will allow us to reset the maintenance service reminder for the engine oil change of the Yamaha Xmax 300 scooter. First, we put t…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos