Do it yourself
Frequently asked questions about cars and motorcycles
In today's tutorial video, you will learn how to remove and replace the front brake pads on the Yamaha Xmax 300 scooter. First, place your scooter on the centre stand and start by unscrewing the fixing bolts of the front brake caliper using a socket spanner. Then, lever inside the caliper to retract the hydraulic piston, and subsequently remove the pads located inside the caliper itself. At this point, clean the caliper of any dirt and install the new high-quality brake pads!

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Xmax 300 .. will show you the procedure for removing and replacing the front brake pads on the Yamaha Xmax 300 scooter. First, place the scooter on the centre.. …
Xmax 300 Below we will see the main instructions useful for disassembling and replacing the rear brake disc of the Yamaha Xmax 300 scooter. First of all, we p…
Xmax 300 You can replace the battery of the Yamaha Xmax 300 by loosening the screws that secure the front panel of the bike to its housing, located at the cen…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos