Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 300
Part:

This guide provides the main instructions for replacing the mirrors on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing the nuts located at the base of the mirrors, removing them. Then install the new mirror brackets, securing them properly to the handlebars, as shown in the video. At this point, check for any vibrations by adjusting the angle of the mirrors with the stand removed, following the video tutorial to the end!

Posted on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rearview Mirror on Yamaha Xmax 300
How to Replace the Rearview Mirror on Yamaha Xmax 300
Xmax 300 In this brief guide, we will provide instructions to remove and replace the external rearview mirrors on the Yamaha Xmax 300 scooter in simple and qu…
Replacing the Front Brake Pads on the Yamaha Xmax 300
Replacing the Front Brake Pads on the Yamaha Xmax 300
Xmax 300 In today's tutorial video, you will learn how to remove and replace the front brake pads on the Yamaha Xmax 300 scooter. First, place your scooter on…
How to replace the battery of the Yamaha Xmax 300?
How to replace the battery of the Yamaha Xmax 300?
Xmax 300 To replace the battery of the Yamaha Xmax 300, loosen the bolts located at the base of the windscreen that secure it in its housing. These screws are…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos