Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil in the Yamaha Majesty 400, you need to unscrew the drain plug located at the bottom of the bike. Once it is unscrewed, collect the used oil in an appropriately positioned container. After the oil has completely drained, remove the oil filter from its housing on the right side of the bike, just above the exhaust. To remove the filter, unscrew the bolts securing its protective cover. Once the filter has been replaced, top up the oil through the designated hole next to the oil filter housing.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Yamaha Majesty 400 scooter?
How to replace the engine oil in the Yamaha Majesty 400 scooter?
Majesty 400 In this tutorial we can see how to replace the motor oil in the Yamaha Majesty 400 scooter, an extremely simple and quick operation. First of all, ma…
How to replace the engine oil in the Yamaha Majesty 400 scooter?
How to replace the engine oil in the Yamaha Majesty 400 scooter?
Majesty 400 In this tutorial, we can see how to replace the motor oil in the Yamaha Majesty 400 scooter, an extremely simple and quick operation. First of all, w…
How to Reset the Oil Light on the Yamaha Majesty 400
How to Reset the Oil Light on the Yamaha Majesty 400
Majesty 400 Manually resetting the engine oil light on your Yamaha Majesty 400 is very simple and takes just a few seconds. There is no need to consult your trus…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos