Do it yourself
Frequently asked questions about cars and motorcycles

Replace the Engine Oil and Oil Filter of the Yamaha FZ1

Model: Yamaha Fz1
Part: Engine oil

Video tutorial

Here are the step-by-step instructions to replace the engine oil and oil filter, performing the routine maintenance service on the Yamaha FZ1 motorcycle. First, unscrew the oil drain bolt found on the sump, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one (screw it in by hand and tighten gently).

Finally, unscrew the filler cap and top up using engine oil with the correct specifications!


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Fz1 In this tutorial, you will see how to change the engine oil in a Yamaha FZ1, a very simple and quick operation to perform every 12 months. First, wai…
Fz1 Today, we will guide you through the process of removing and replacing the air filter of the Yamaha FZ1 engine, following the instructions below. Fir…
Fz1 Hello, today focus on replacing the spark plug in your Yamaha FZ1. First, remove the side fairings of the bike. Next, disconnect the cable connecting…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos