Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Clutch on a Yamaha FZ1

Model: Yamaha Fz1
Part: Clutch

Video tutorial

To replace the clutch on a Yamaha FZ1, loosen the screws that secure the cover on the right side of the bike, right next to the footpeg. Once the screws are removed, you can take off the cover and access the underlying clutch, which must be removed from its housing after loosening the bolts securing the discs.

This will allow you to insert the new clutch, securing it with its bolts; finally, refit the cover on the right side of the bike, fastening it with the appropriate screws.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

Fz1 To replace the clutch on the Yamaha FZ1, loosen the screws securing the cover on the right side of the bike, just above the corresponding footpeg. On…
Fz1 To replace the clutch on the Yamaha FZ1, loosen the screws securing the cover on the right side of the bike, just above the footpeg. Once the screws …
Fz1 Hello, today focus on replacing the spark plug in your Yamaha FZ1. First, remove the side fairings of the bike. Next, disconnect the cable connecting…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos