|
Do it yourself
| |||
| ||||
How to replace the clutch on the Yamaha FZ1?
Model: Yamaha Fz1
Video tutorial
To replace the clutch on the Yamaha FZ1, loosen the screws securing the cover on the right side of the bike, just above the footpeg. Once the screws are removed, you can take off the cover and access the clutch underneath, which must be pulled out after loosening the bolts securing the discs. This will allow you to insert the new clutch, securing it with its bolts; after this operation, reinstall the cover using the appropriate bolts.
Updated on 20 July 2026 by ScegliAuto
Related tutorials
Fz1
To replace the clutch on a Yamaha FZ1, loosen the screws that secure the cover on the right side of the bike, right next to the footpeg. Once the scr…
Fz1
Hello, today focus on replacing the spark plug in your Yamaha FZ1. First, remove the side fairings of the bike. Next, disconnect the cable connecting…
Fz1
To replace the exhaust on the Yamaha FZ1, loosen the two nuts securing the bracket at the base of the exhaust. You can also loosen the screw that sec…
|
Replacing the Front Brake Pads on the Triumph Daytona 675
The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
