Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Refit the Front Wheel of a Yamaha FZ-09

Model: Yamaha Fz 09
Part: Wheel

Video tutorial

Today, we will see in this short and simple guide how to remove and replace the wheel or tyre of the Yamaha FZ-09 motorcycle, as well as the MT-09. First, place the motorcycle on its side stand and start loosening the central wheel nut using a ratchet with a hex socket; then unscrew the ABS sensor screw and remove the screws from the brake caliper, detaching the caliper.

At this point, loosen the two fork screws; then position the stand, lifting the wheel off the ground, and slide out the central axle to remove it. Apply the reverse procedure for reassembly!


Updated on 10 June 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Pads on the Yamaha FZ 09
Replacing the Front Brake Pads on the Yamaha FZ 09
Fz 09 In this video, you will see how to disassemble and replace the front brake pads on the Yamaha FZ 09 (FZ9) by following these simple steps. First, uns…
Replacing the Chain Tensioner on a Yamaha FZ-09
Replacing the Chain Tensioner on a Yamaha FZ-09
Fz 09 Today’s main steps will show you how to remove and replace the chain tensioner on a Yamaha FZ-09 motorcycle. In the video, we will see the engine blo…
How to Replace the Rear Brake Pads on a Yamaha FZ-09
How to Replace the Rear Brake Pads on a Yamaha FZ-09
Fz 09 This tutorial shows how to replace the rear brake pads on a Yamaha FZ-09, a straightforward task. Start by positioning yourself in front of the brake…

How to Remove the Radiator from an Aprilia RSV 1000R

This guide provides the main instructions for removing and replacing the cooling radiator of the Aprilia RSV 1000R motorcycle. First, place your motorcycle on a stand and start unscrewing the fixing screws of the side plastic fairings to remove them; then disconnect the radiator hoses, draining the fluid into a container, and unscrew the bracket screws to remove it from the frame and engine, as illustrated in the video. At this point, install the new radiator and finally top up with the new antifreeze!

Watch the video!


by ScegliAuto

More videos