Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Fz 09
Part: Brake pads

This tutorial shows how to replace the rear brake pads on a Yamaha FZ-09, a straightforward task. Start by positioning yourself in front of the brake in question, then loosen the pad pin and completely unscrew the two caliper mounting bolts. Next, separate the caliper from the disc, remove the pin, and take out the old pads. Now, clean any dirt residue present in the brake, compress the piston, position the replacement pads, and reassemble everything by following the reverse procedure.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Brake Pads on the Yamaha FZ 09
Replacing the Front Brake Pads on the Yamaha FZ 09
Fz 09 In this video, you will see how to disassemble and replace the front brake pads on the Yamaha FZ 09 (FZ9) by following these simple steps. First, uns…
How to Remove and Refit the Front Wheel of a Yamaha FZ-09
How to Remove and Refit the Front Wheel of a Yamaha FZ-09
Fz 09 Today, we will see in this short and simple guide how to remove and replace the wheel or tyre of the Yamaha FZ-09 motorcycle, as well as the MT-09. F…
Replacement of the chain tensioner for the Yamaha FZ-09
Fz 09 Today we will see the main instructions useful for disassembling and replacing the chain tensioner of the Yamaha FZ-09 motorcycle. First of all, we p…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos