Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Yamaha TMAX 500 Scooter

Model: Yamaha Tmax 500
Part: Air filter

Video tutorial

In this tutorial, you will see how to replace the air filter on a Yamaha TMAX 500 scooter, a very simple and quick operation. First, unscrew the fastening bolts of the front fairing, then remove it and take off the windscreen.

Continue by removing the additional plastic cover, unscrew the fastening screws of the airbox, and open it. At this point, you can take out the old filter, clean the inside of the housing from any dirt residue, and insert the replacement. Finally, reassemble everything by simply following the reverse procedure.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service on the Yamaha TMAX 500 Scooter?
How to Reset the Oil Service on the Yamaha TMAX 500 Scooter?
Tmax 500 As shown in this tutorial, resetting the oil service on the Yamaha TMAX 500 scooter is an extremely simple and quick operation. Before proceeding, en…
How to Change the Engine Oil on a Yamaha TMAX 500 Scooter?
How to Change the Engine Oil on a Yamaha TMAX 500 Scooter?
Tmax 500 In this tutorial, you will see how to change the engine oil on a Yamaha TMAX 500 scooter, a very simple and quick operation. First, ensure the engine…
How to Reset the Drive Belt Service on a Yamaha TMAX 500 Scooter?
How to Reset the Drive Belt Service on a Yamaha TMAX 500 Scooter?
Tmax 500 This tutorial shows how to reset the drive belt service on a Yamaha TMAX 500 scooter, a very simple and quick operation to perform only after complet…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos