|
Do it yourself
| |||
| ||||
Model: Yamaha Venture
Replacing the battery in the Yamaha Venture remote, as shown in this tutorial, is a straightforward and quick task. You will only need a small flathead screwdriver and a replacement CR2025 battery. First, press the button on the back to extract the emergency metal key. Then, use the screwdriver to pry open the rear cover. Finally, remove the internal cap, take out the old battery, and insert the new one, ensuring it is the correct way round.
Updated on 12 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Tmax 530
To replace the battery in the Yamaha Tmax 530 remote, pull the key out from the top of the device. Once the key is removed, lever inside its housing …
Mio
In this tutorial, you can see how to replace the remote battery on the Yamaha MIO I 125S scooter, a very simple and quick operation. For this, you wi…
Xmax 300
In this tutorial, you will see how to replace the remote battery on the Yamaha XMAX 300 scooter, a very simple and quick operation. You will need a s…
|
How to Replace the Clutch on a Triumph Speed Triple?
To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.075
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
