Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Throttle Cable on a Yamaha FZ6?

Model: Yamaha Fz6
Part: Accelerator

Video tutorial

In this tutorial, you will see how to replace the throttle cable on the Yamaha FZ6, a very simple and quick operation. Start by removing the fuel tank by taking out the appropriate bolts, then unscrew the screws securing the right-hand grip housing, loosen the nut at the end of the cable on the throttle body, and disconnect it from both the body and the grip.

To facilitate the passage of the new cable, you can remove the air filter housing, the battery, and its support. To reconnect it and reassemble everything, simply follow the reverse procedure.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Fz6 In today’s tutorial, see how to replace the engine oil and oil filter while performing routine maintenance on a Yamaha FZ6 and FZ6 Fazer. First, posi…
Where Are the Fuses Located on a Yamaha FZ6?
Where Are the Fuses Located on a Yamaha FZ6?
Fz6 In this video, you can see where the fuses are located on the Yamaha FZ6, useful if you need to check the fuse of a malfunctioning device. As shown, …
Yamaha FZ6 fuse schema and positioning
Yamaha FZ6 fuse schema and positioning
Fz6 These short and simple instructions will show us how to access the fuse box of the Yamaha FZ6 motorcycle, as well as the FZ6 Fazer. First, we put the…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos